Think you know how to properly use shampoo and conditioner?
You might actually be using them incorrectly and therefore doing more harm than good to your locks.
That’s the bad news. The good news is that this blog is going to help get back to using them properly again.
To begin with, shampoo, in its simplest form, is a cleansing product.
High-end shampoo brands such as Kerastase, Alfaparf Milano, and L’Oreal pride themselves on producing shampoo products that thoroughly cleanse your hair.
We won’t bore you with all the technical words behind it, but it contains elements that help remove sweat, dirt, oil, and all the unwanted nasties from your hair.
Whereas conditioners have all the necessary natural oils and proteins to keep your hair looking shiny and smooth.
After you’ve thoroughly rinsed your hair, it leaves a thin film behind to protect your hair.
The shampoo is typically used by applying it to your hair, scrubbing, and then rinsing it before applying your conditioner.
The shampoo will remove any of the oil and dirt left in your hair but it may leave it frizzy and rough too. We really don’t want that for you.
The good news is that using a high-quality conditioner product will help with this problem should it arise.
The question you should be asking yourself is if shampooing before using condition is the only way to wash your hair?
The answer is no. There’s another way you can effectively wash your hair known as reverse shampooing.
This involves applying the conditioner before you apply the shampoo.
There’s also another way where you remove the shampoo from the process altogether.
But, which is better for you?
It will always depend on your preference, and we’d say the traditional way is always best, but it’s always worth trying another method to see if you get a better result.
Again, this all comes down to personal preference as there’s no strong evidence to suggest it works better than the more traditional method.
However, we would say that if your hair is feeling greasy after you’ve conditioned it, you might try conditioner before using the shampoo.
If you find it works for you, we’d say continue using this method over shampoo before conditioner.
But if you are going to go down this route, then ensure you’re only doing it once a week versus the multiple times you can apply the traditional method.
We’ve said that this method could be used for those who are looking to remove the grease from their hair after they’ve conditioned it.
However, we’d say that if your hair is particularly dry, if it happens to be damaged or if it’s quite fine, then this method is especially for you.
In closing, whether you’re using high-end shampoo and conditioner from brands such as Kerastase, Alfaparf Milano, and L’Oreal, then you will be using some great products for your hair.
Whilst washing your hair using the traditional method is recommended, there are a few other options available to you that we have mentioned in this blog.
Regardless of which method you use, the goal here is to remove as much dirt and oil from your hair as possible to ensure it looks as smooth & shiny as possible.
How to actually wash your hair properly?
First, you should comb your hair thoroughly to make shampooing easier and not to tangle your hair further. Dampen your hair evenly. You can choose the temperature of the water yourself, but in order to achieve the best result, I would recommend using warm water, since it is warm water that opens hair scales and washes away excess oil and dirt in the best way.
Then, rinse your hair with water, gently brushing your fingers to remove any remaining conditioner and styling products. Next, lather some shampoo in your hands and apply it to the scalp. It is very important to apply the shampoo to the scalp and not to the ends of the hair because it is easy to dry out and make them weak and brittle. Also, avoid rubbing in the shampoo too vigorously to avoid tangling your hair. After thoroughly cleaning the scalp and hair, gently rinse off the shampoo.
In most cases, shampooing should be done twice. After the first application, you will wash away all the grease and dirt, and during the second, the shampoo will directly affect the hair. I would advise you to wash your hair twice with shampoo and keep it on your hair for a couple of minutes, and then rinse thoroughly with warm water.
After rinsing your hair, it is important to squeeze out excess water very gently without tugging, as wet hair becomes very brittle. After getting rid of excess moisture, apply a little conditioner along the entire length of your hair and to the ends. Then collect them under a shower cap and let the conditioner soak in for 10 minutes. Then wash off with plenty of water. One little tip – your hair will become smooth and shiny, and its scales will close if you rinse it with cold water after washing.
The conditioner needs to be applied along the entire length, but too much of this product at the roots must be thoroughly rinsed off, otherwise, the hair will look dirty. For best results, a conditioner should be applied from root to tip to repair any damaged follicles. Owners of short and fine hair also need to use conditioner balm, but in small quantities to avoid an unkempt look.
Apart from this, if you are interested to know about Y8, TrueID, Project free TV, M4ufree, Data lifecycle management, Renekton Counter, Liquid Drywall, Data lifecycle management, Renekton Counter, Liquid Drywall, Hawaiian Baby Woodrose seeds, Ground Cardamom, 1616 Angel Number, Goldendoodle dog, Milla Jovovich net worth, Bad Bunny net worth, Megan Fox net worth, Noah Beck Net Worth, Discord profile picture, Download Discord on Windows 10, God Eater season 2, Primal season 2, Lil Baby net worth, Michael Jordan net worth, and facts about Jennifer Lopez.